luy3333/h0 ligitek electronics co.,ltd. property of ligitek only data sheet doc. no : qw0905-luy3333/h0 rev. : a date : 12 - oct - 2005 super bright round type led lamps
0 x 60 x 100% 75% 0 25% 50% -60 x 50% 100% 75% 25% -30 x 30 x page 1/4 ligitek electronics co.,ltd. property of ligitek only part no. luy3333/h0 package dimensions directivity radiation note : 1.all dimension are in millimeter tolerance is ? 0.25mm unless otherwise noted. 2.specifications are subject to change without notice. + - 2.54typ 1.0min 25.0min 7.6 8.6 5.0 5.9 ?? 0.5 typ 1.5max
part no. luy3333/h0 min. ligitek electronics co.,ltd. property of ligitek only unit uy ratings page 2/4 symbol parameter absolute maximum ratings at ta=25 j ma ma mw g a 50 90 120 10 j -40 ~ +100 max 260 j for 5 sec max (2mm from body) -40 ~ +85 j i f i fp pd ir forward current power dissipation reverse current @5v peak forward current duty 1/10@10khz tstg tsol storage temperature soldering temperature operating temperature t opr min. typ. 1100 38 1800 max. 595 15 1.7 2.6 dominant wave length f dnm luminous intensity @20ma(mcd) viewing angle 2 c 1/2 (deg) forward voltage @20ma(v) spectral halfwidth ??f nm lens emitted color water clear yellow part no luy3333/h0 material algainp typical electrical & optical characteristics (ta=25 j ) note : 1.the forward voltage data did not including ? 0.1v testing tolerance. 2. the luminous intensity data did not including ? 15% testing tolerance. electrostatic discharge esd 2000 v
ambient temperature( j ) fig.4 relative intensity vs. temperature relative intensity @20ma wavelength (nm) 500 0 0.5 550 600 650 ambient temperature( j ) fig.5 relative intensity vs. wavelength fig.3 forward voltage vs. temperature forward voltage@20ma normaliz @25 j -20 1.0 -40 0.8 20 060 40 1.0 0.9 1.1 1.2 0.5 relative intensity @20ma normalize @25 j 100 80 -40 -20 0 020 3.0 2.5 2.0 1.5 1.0 80 60 40 100 ligitek electronics co.,ltd. property of ligitek only fig.2 relative intensity vs. forward current forward current(ma) 4.0 fig.1 forward current vs. forward voltage typical electro-optical characteristics curve 100 forward current(ma) 0.1 1.0 10 1.0 forward voltage(v) 2.0 3.0 1000 uy chip relative intensity normalize @20ma 2.0 1.5 1.0 0.5 5.0 0 1.0 10 3.0 2.5 page3/4 100 1000 part no. luy3333/h0
part no. luy3333/h0 reference standard page 4/4 mil-std-750: 1026 mil-std-883: 1005 jis c 7021: b-1 jis c 7021: b-12 mil-std-883:1008 jis c 7021: b-10 mil-std-202:103b jis c 7021: b-11 mil-std-202: 107d mil-std-750: 1051 mil-std-883: 1011 description test condition test item reliability test: this test is conducted for the purpose of detemining the resisance of a part in electrical and themal stressed. 1.under room temperature 2.if=20ma 3.t=1000 hrs (-24hrs, + 72hrs) 1.ta=-40 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) 1.ta=105 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) the purpose of this is the resistance of the device which is laid under ondition of high temperature for hours. 1.ta=65 j? 5 j 2.rh=90 %~95% 3.t=240hrs ? 2hrs 1.ta=105 j? 5 j &-40 j? 5 j (10min) (10min) 2.total 10 cycles the purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. the purpose of this is the resistance of the device which is laid under condition of low temperature for hours. operating life test low temperature storage test high temperature storage test high temperature high humidity test thermal shock test the purpose of this test is the resistance of the device under tropical for hous. ligitek electronics co.,ltd. property of ligitek only mil-std-202: 208d mil-std-750: 2026 mil-std-883: 2003 jis c 7021: a-2 1.t.sol=230 j? 5 j 2.dwell time=5 ? 1sec this test intended to see soldering well performed or not. solderability test mil-std-202: 210a mil-std-750: 2031 jis c 7021: a-1 1.t.sol=260 j? 5 j 2.dwell time= 10 ? 1sec. this test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. solder resistance test
|
